Epson Stylus

Epson WorkForce Pro WF-3730 Driver, Installation, and Specs

Epson WorkForce Pro WF-3730 Driver, Installation, and Specs. The Epson WorkForce Pro WF-3730 is an all-in-one inkjet printer with scan and copy functions, an automatic document feeder and built-in faxing. It works with Windows and macOS. The capacity of the main paper tray is 250 sheets, a generous size. It can accept paper of only 22 # basis weight (common office bond), less than what many printers can accept.

There’s a second tray for full-size paper, allowing you to load letterhead paper. There’s an automatic document feeder to let you copy or scan a stack of pages in one operation. The automatic document feeder can even copy or scan both sides of the pages. The printer has a medium-size 2.7-inch display screen with a touchscreen interface.

You can connect directly to a PC with a USB cable, or to your network router either wirelessly with WiFi or with an Ethernet cable. This model has built-in faxing, can store incoming faxes if the paper runs out, and can send faxes from an attached PC. When setup for use, the Epson WorkForce Pro WF-3730 requires a space that measures 13.7 inches high by 16.7 inches wide by 20.5 inches deep, and weighs 24.7 pounds.

Specs

Powered by PrecisionCore® technology, the WF-3730 delivers Performance Beyond Laser™ and print-shop-quality prints with laser-sharp text. With fast print speeds, the WF-3730 quickly produces pro-quality documents. Its 500-sheet paper capacity means you’ll replace paper less often. And, it offers up to 30 percent lower printing costs vs. color laser1. Plus, it includes a 2.7″ color touchscreen, 35-page Auto Document Feeder and auto 2-sided printing. A true breakthrough, the WF-3730 combines powerful performance and an increased paper capacity in one space-saving design.

  • Powered by PrecisionCore — Performance Beyond Laser
  • Fast printing — 20 ISO ppm (blk), 10 ISO ppm (clr)†
  • Reload paper less often — 500-sheet capacity
  • Save — up to 30% lower printing costs vs. color laser1
  • Powerful performance and compact design

Model: C11CH04201

Ink

Ink Type:
DURABrite Ultra pigment ink (smudge, fade and water resistant)
Ink Palette:
Cyan, Magenta, Yellow and Black
Ink Configuration:
4 individual ink cartridges
Replacement Ink:
702 Standard-capacity Black, Cyan, Magenta, Yellow10
702XL High-capacity Black, Cyan, Magenta, Yellow10
Ink Yield Information:
702 Standard-capacity yields10
Black: 350
Color: 300
702XL High-capacity yields10
Black: 1,100
Color: 950

The printer is designed for use with Epson cartridges only, not third-party cartridges or ink.

Epson WorkForce Pro WF-3730 driver Downloads for Microsoft Windows 32-bit– 64-bit and Macintosh Operating System.

Download the correct driver that compatible with your operating system.

Epson WorkForce Pro WF-3730 All-in-One Printer Drivers and Software for Microsoft Windows and Macintosh.

Epson WorkForce Pro WF-3730 Driver Operating System(s):

Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit, Windows Vista 32-bit, Windows Vista 64-bit, Windows XP 32-bit, Windows XP 64-bit, Mac OS X (v10.8.x), Mac OS X (v10.7.x), Mac OS X (v10.6.x), Mac OS X (v10.5.8)

Epson WorkForce Pro WF-3730 Driver Downloads

This driver works both the Epson WorkForce Pro WF-3730 Series.

How to install drivers Epson WorkForce Pro WF-3730?

Model 1: How to install Epson WorkForce Pro WF-3730 All-in-One Printer driver.

Using installation CD, how to install Epson WorkForce Pro WF-3730 All-in-One Printer driver.

Requirements:

  1. Ensure your computer is with CD/DVD drive.
  2. Need installation disc of Epson WorkForce Pro WF-3730 which came along with accessories bundle.
  3. USB cable to connect with Epson WorkForce Pro WF-3730.

Guidelines to install Epson WorkForce Pro WF-3730 All-in-One Printer driver via CD/DVD drive.

  • Switch on your computer where you want to install Epson WorkForce Pro WF-3730 All-in-One Printer driver.
  • Until unless you asked to connect USB to the computer, please don’t plug it.
  • Just put in CD/DVD into your computer and execute the setup file. It triggers to start the installation wizard, then Follows the instruction until to finish it.
  • While the process you will be asked to connect USB cable between Epson WorkForce Pro WF-3730 and computer.
  • Wait for that and connect only when it asks you to connect. It will detect the Epson WorkForce Pro WF-3730 and go ahead to next step if all goes well.
  • Input the values for each step in the wizard and complete the install.
  • Now you can print from Epson WorkForce Pro WF-3730 as the driver has installed.
Model 2: How to install Epson WorkForce Pro WF-3730 All-in-One Printer driver.

Using setup file (without CD/DVD), how to install Epson WorkForce Pro WF-3730 All-in-One Printer driver.

Requirements:

  1. Download setup file of respective Epson WorkForce Pro WF-3730 All-in-One Printer driver from the above-recommended link or Drivers & Downloads
  2. USB cable to connect to the printer.

Guidelines to install the driver for Epson WorkForce Pro WF-3730 using downloaded setup file.

  • Switch on your computer where you want to install Epson WorkForce Pro WF-3730 All-in-One Printer driver.
  • Until unless you suggested connecting the USB cable to the computer, please don’t connect it.
  • Download the setup file from above link if you didn’t download them. Run the setup file as administrator.
    At the execution of this wizard, you have to connect USB cable between Epson WorkForce Pro WF-3730 and your computer.
  • Wait for that and connect only when it asks you to connect. It will detect the Epson WorkForce Pro WF-3730 and go ahead to next step if all goes well.
  • Input the values for each step in the wizard and complete the install.
  • Now your printer is ready to use as the software of Epson WorkForce Pro WF-3730 All-in-One Printer driver installed successfully.
Model 3: How to install Epson WorkForce Pro WF-3730 All-in-One Printer driver manual way.

Using “Add a printer” option in Windows, how to install Epson WorkForce Pro WF-3730 All-in-One Printer driver manual way.

Requirements:

  1. Download printer application and setup file of Epson WorkForce Pro WF-3730 from the above-recommended link.
  2. USB cable to connect to the printer.

Guidelines to install Epson WorkForce Pro WF-3730 All-in-One Printer driver using downloaded setup file.

  • Switch on your computer where you want to install Epson WorkForce Pro WF-3730 All-in-One Printer driver.
  • Connect USB cable between computer and printer.
  • Extract the application zip files to a file location.
  • Click on Start button and Model “Printer.” You will get an option like “Add a printer.” Click on that.
  • The next instruction will ask to point out where the driver located. Do that according to the progress.
  • Answer the wizard options till configuring the Epson WorkForce Pro WF-3730.

The above instruction helped you to install Epson WorkForce Pro WF-3730 All-in-One Printer driver and make the printer working fine. Thank you for visiting us.

Join The Discussion

This site uses Akismet to reduce spam. Learn how your comment data is processed.